Orthodontic Adhesive

Orthodontic Adhesive

share

Orthodontic Adhesive

  • 产品详情

【Product name】Orthodontic Adhesive

【Specification】Primer 6ml/ bottle , adhesive 4g/ syring

【Ingredients】 Orthodontic Adhesive is mainly composed of primer and adhesive (paste). Primer consists of polymerizable resin monomer, photoinitiator, stabilizer, coupling agent and inorganic filler; Adhesive consists of polymerizable resin monomer, photoinitiator, stabilizer and inorganic filler.

【Application】 Bond orthodontic products to tooth surface (enamel contact only) during orthodontic treatment.

【Applicable senarios】 Orthodontic treatment with orthodontic brackets.

【Certification】 ISO13485/ Free Sales Certificate



【Product properties】

● The pimer and adhesive maintain physical uniformity after undergoing environmental light sensitivity.

● The sheer bonding strength for metal brackets no less than 6MPa.



【Storage conditions】

1.Store in a cool and dark place at 5°C-30°C.

2.Transport in a sealed, light-protected manner, avoiding severe impact, vibration.

3. Avoid contact with rain and snow.

【Service life】3 years unopened, use out with one month after opening.

【Contraindications】Contraindicated in patients with allergies to components of this product.

【Special reminder】Avoid contact with eyes and skin when using this product. If it contacts with the eyes or skin, rinse with plenty of water and seek medical attention if necessary.

【Caution】

1.This product is photosensitive. If the unused material is removed, it should be stored away from light.

2. Do not expose thisp roduct to high temperatures or strong light, avoid prolonged exposure to ambient light.

3. Gloves should be worn during the procedure.

4. Orthodontic products for bonding should be applied by professional dentists.



【Packge】

Adhesive,   4g/ syring1 syringe x 1 bag
Primer, 6ml/ bottle1 bottle x 1 bag


    


【How to use】

1. Tooth Preparation

Ensure that the teeth are clean, acid-etched, and dried with oil-free air before using this product.

2. Apply the Primer

Use a small brush to apply a thin layer of the primer on the acid-etched tooth surface (should be moist).

3. Bonding

Dispense an appropriate amount of adhesive onto the bonding surface of the orthodontic appliance,   fully cover it, and immediately bond the orthodontic appliance to the tooth surface. Align it, apply slight pressure for 5-10 seconds to prevent sliding, then remove excess primer and adhesive.

4. Light Curing

Use a light-curing device (lamp) to cure the bonding material on the orthodontic appliance (each side of metal orthodontic appliance should be light-cured for 40 seconds, and the front of ceramic orthodontic appliance should be light-cured for 20 seconds). LED lamps with a wavelength covering 420-480nm and irradiance (light intensity) of no less than 1000 mw/cm² are recommended. Orthodontic appliance can be performed after curing.


Consult now